Email: demi@gl-com.com

language

Shenzhen MaoTeWang Electronic Technology Co., Ltd.

Home page

10G+GE XGS8302U-JR

The XGS8302U-JR compliant with ITU-T G.987 XGSPON standards. It has good interoperability which can interoperate with mainstream central oﬃce manufacturers OLTs equipment. Through high-speed PON access services, users can be provided with broadband Internet or access to the company's corporate network services. it consists of convenient and ﬂexible networking applications, simple & fast installation, high reliability & maintainability.

Category:

ONU

E-mail

Product Details

Product Overview

Product Highlight

1 * XGSPON interface: SC/UPC （or SC/APC）interface, XGSPON standard

1 * 10G+1*GE, 1000 MBPS, RJ - 45, IEEE802.3-2005 standard

Solution Display

The PON system usually consists of the OLT at the office side, the ONU and the ODN at the user side, and adopts a point-to-multipoint network structure. The ODN consists of single-mode optical fibers and passive optical devices such as optical splitters and optical connectors. It provides the optical transmission medium for the physical connection between the OLT and ONU.Implement FTTX service deployment application.

Product Specification

XGS8302U-JR	Description
ONT Type	SFU/HGU
Interface	1RJ45 (GE)+1RJ45 (10GE) + XGSPON
LED	POWER+PON/LOS+INTERNET+1G+10G
CPU Frequency	1 GHz Dual-Core
Flash & Memory	Flash: 128MB NAND; Memory: 512 DDR3
Power Supply	12V/1A
Power Consumption	≤8W
Environment Standard	Operating Temperature: -5℃~45℃ Storage Temperature: -20℃~70℃ Relative Humidity: 5%~95% (non-condensing)
Weight	0.15KG
Size	135mm90mm36mm (LWH)
Module Type	Class B+, SC/UPC
Wavelength	UP 1270nm, Down 1577nm
TX Optical Power	5-9dBm
RX Optical Sensitivity	-28dBm
Transmission Distance	0~20km
Transmission Rate	XGSPON: Upstream 10Gbps, Downstream: 10Gbps
LAN Interface Type	1G :RJ45（10/100/1000Mbps ） 10G :RJ45（1/2.5/5/10 Gbps ）

Panel view

Interface		Description
1	RST	Reset the ONT
2	1G	RJ-45 10/100/1000M Base-T Ethernet Interface
3	10G	RJ-45 100/1000/2500M Base-T Ethernet Interface
4	POWER	12V/1A, power input interface
4	PON	XGSPON interface
5	ON/OFF	Power switch button

LEDs Operating Status

The operation status of XGS8302U-JRcan be determined by using the front LED. The panel LED indicator will display the status of each interface. The meaning of LED is shown in the following table.

LED	Color	Indicates
PWR	Green/Solid	Normal
PWR	OFF	No power
PON	OFF	Optical link is NOT OK（rang: out of -8~-29 dbm）
PON	Green/Solid	Registerd successful and active
LOS	Red	Optical link is NOT OK（rang: out of -8~-29 dbm）
LOS	OFF	Optical link is OK（rang: in -8~-29 dbm）,Registerd successful and active
INTERNET	Green/Solid	The wan interface of the internet is configured
INTERNET	OFF	The Internet WAN interface is not configured or the Internet WAN interface is configured but does not take effect.
LAN1G/ LAN10G	Green/Flash	device connected
	Green/Flash	Active or Link data receive and transfer (Green/flash)
	OFF	device not connected
	OFF	link down

Plug-In Units

The device uses a standard 5.5*2.1*9.5mm Non tuning fork DC head interface power adapter. Select an appropriate adapter for power supply according to device energy consumption.

The below shows the electrical characteristics of the adapter：

Characteristic	Power adapter
AC: INPUT	AC: 100～240V; 50/60Hz
DC: OUTPUT	DC: 12V/1A
Rated Power	12W

Software Specification

Attributes	Description
XGSPON Feature	ITU-T G.987 ITU-T G.988/TR255/TR156 15 TCONTs /256GEM ports 8 Egress queues per TCONT at least VLAN/ priority/VEIP gem mapping mode SN/LOID/SN +Password authentication Performance monitoring: eth/Gem port Dying gasp
Ethernet Port	Ethernet port-based VLAN tags and tag removal MAC address learning 10/100/1000/10000Mbps Auto negotiation
L2 Feature	MAC learning (SVL)/aging Support max frame length to 1518 bytes VLAN tagging for untagged packets Support VLAN 1-4094
L3 Feature	PPPoE/Static IP/DHCP NAT/NAPT Port forwarding ALG, UPnP, DDNS IPv4/IPv6 dual stack, DS-Lite Static, and Default Routes Multiple services on one WAN port
QoS	Support 8 Queues with Strict Priority Ethernet port rate limitation 802.1 priority SP/WRP Service flow classification
Multicast	IGMP v2 (RFC 2236) and IGMP v3 (RFC 3376) IGMP snooping and IGMP Proxy MLD v1
Management	OMCI/WEB UI/TR069 Telnet/SSH Management with CLI commands Dual-system software backup and rollback

Purchase Info

Model Number

Description

XGS8302U-JR

1*GE+1*10GE+XGSPON，

Accessories: Power Adapter, RJ45 cable,；

Exhibition Preview

FAQ

Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.

What is an optical network terminal (ONT)? How does it differ from a regular modem?

An optical network unit (ONU) is an end device in a fiber optic network that converts optical signals transmitted via fiber optics into electrical signals (for use by routers, computers, and other devices), and vice versa.

What is the architecture of a fiber optic network (PON)?

Fiber optic networks typically use a passive optical network (PON) architecture, which is divided into three layers

What are the functions of the PON port and LAN port on an optical network terminal (ONT)?

PON port (fiber optic interface): Connects to the fiber optic cable entering the home and receives optical signals (usually SC/APC interface, blue square head).

Why does the optical network terminal need to register LOID/SN?

LOID (Logical Identifier) or SN (Serial Number) is the credential used by operators to bind user identities, and is used for OLT authentication of optical modems.

Optical modem dialing vs. router dialing: which is better?

Ordinary users: Optical modem dialing. Game/NAS users: Switch to bridge mode and dial up using a high-performance router.

How to determine whether the fiber optic signal is normal?

Check the optical modem indicator lights Log in to the optical modem management interface: Check the optical power (unit: dBm)

Recommend