Email: demi@gl-com.com
L3 Managed Ethernet Switch S5720 Series
Category:
Ethernet switch (core layer)
Product Details
Product Overview
The S5720-8H is 8-port 10 Gigabit switch that provides advanced high-bandwidth performance, which is easy to use and reliability. This 10 Gigabit switch offers eight dedicated 10G ports for high-speed network connections with a 160Gbps switching capacity and a sturdy, rack mountable metal housing. This 10G switch is a cost-effective switch solution for high speed 10 Gigabit network connections.
The S5720-8X is our independently developed layer3 10G managed switch. It with 8*10Gbps SFP+ fiber ports and 1*Console port. S5720-8X provides complete security policies, complete QoS policies and rich VLAN functions. It is easy to manage and maintain and meets the needs of enterprises' networking and access requirements for communities, hotels, office networks, and campus networks.
Product Information
 | S5720-8H |
8* 1G/2.5G/5G/10G Base-T RJ45 port 160Gbps Switching capacity 238 Mpps forwarding rate 12V/4A 207×136×35mm | |
 | S5720-8X |
8* 1G/2.5G/10G Base-X SFP+ port 160Gbps Switching capacity 238Mpps forwarding rate 12V2.0A 207×136×35mm |
Key Features
Carrier-level equipment stability
Based on Linux operating system，support IPv4/IPv6 dual protocol stack platform
Support multiple link redundancy and network redundancy protocols such as STP/RSTP/MSTP/LACP
Perfect safety mechanism
Support link protection functions FlexLink, LACP
Support remote loop detection function
Support remote user authentication based on Tacacs+, Radius, and Local user authentication
Powerful QoS capabilities
Support port speed and flow speed limit function
Support classification based on service flow and Qos flow control function
Support queue scheduling algorithms such as SP/WRR/SP+WRR
Support port-based and service flow-based mirroring functions
Rich management protocols
Support easy-to-use network management function
Support CLI based on RS232 serial port, Telnet and SSHv2
Support WEB-based configure operation management, support SNMP V1/V2/V3
Support remote upgrade or equipment through FTP and TFTP
Hardware Specifications
Attributes | S5720-8H | S5720-8X |
Ethernet Port | 8* 1G/2.5G/5G/10G Base-T RJ45 port | 8* 1G/2.5G/10G Base-X SFP+ port |
Console Ports | 1* RJ45 | 1* RJ45 |
Chip Solution | RTL9303 | RTL9303 |
Switching Capacity | 200Gbps | 200Gbps |
Forwarding Rate | 148.81Mpps | 148.81Mpps |
MAC Address | 16K | 16K |
Jumbo Frame | 12K | 12K |
Packet Buffer | 12Mbit | 12Mbit |
LED | PWR, LINK/ACT, SYS | PWR, LINK/ACT, SYS |
Memory and Storage | Memory：512MB, Storage：32MB | Memory：512MB, Storage：32MB |
Power Supply | 12V/4A | 12V/2A |
Power Consumption | Full load≤36W | Full load ≤20W |
Dimensions and Weight | 207×135×35mm (L*W*H), 1KG | 207×135×35mm (L*W*H), 0.85KG |
Temperature | Working Temperature: -10℃～45℃ Storage Temperature: -40℃～70℃ | Working Temperature: -10℃～45℃ Storage Temperature: -40℃～70℃ |
Humidity | Relative Humidity: 5%~95%, non-condensing | Relative Humidity: 5%~95%, non-condensing |
Panel view
 |  |
LED indicator
Color | Function | Description | ||
PWR | Green | Power status | ON | The AC power module is normal. |
OFF | The AC power module faulty or unavailable. | |||
SYS | Green | System running status | Green OFF | The device is not running or power off. |
Green Flash | The device is running normally. | |||
GE/SFP Port | Green | Port status | ON/Flash | The link is properly connected (link up) and in action Works in 10Gigabit mode. |
OFF | The link is interrupted (link down). | |||
Yellow | ON | Port negotiation works in 1G/2.5G mode | ||
Plug-In Units
Power Supply Unit (PSU)
The 5720-8H/X device uses a 12V power adapter with 5.5*2.1*9.5mm Non tuning fork DC head.
The below shows the electrical characteristics of the switch：
Characteristic | Power Supply |
S5720-8H | 12V/4A |
S5720-8X | 12V/2A |
FAN Unit
The fans of the device operate according to the power of the device environment. A fan pack is built into the chassis for heat dissipation.
Software Specifications
Attributes | S5720-8H/8X |
VLAN | Support 4K VLAN Support VLAN based on port, MAC and protocol Support dual Tag VLAN, Access/Trunk/Hybrid |
Ethernet | Ethernet interface operating modes Ethernet interface operating rates Jumbo Frame Port enable/disable Port based storm-control Unknow-unicast/unknow-multicast/broadcast storm-control Port-isolate |
Stackable | Support Stacking of 8 units through a single IP address Support Unified management Support Redundancy mechanism Support High speed interconnect |
MAC | Support static MAC address setting Support black hole MAC address filtering Support port MAC address limit Automatic learning and aging of MAC addresses |
ARP | Static and dynamic ARP entries Aging of ARP entries ARP-Proxy |
Port Control | Support two-way bandwidth control Support port storm suppression Support 9K Jumbo ultra-long frame forwarding |
Port Aggregation | Support static link aggregation Support dynamic LACP Each aggregation group supports a maximum of 8 ports LAG load balance（SIP/DIP/SMAC/DMAC） |
Mirroring | Supports multi-port mirroring analysis Service flow-based image analysis |
ACL | Support standard and extended ACL Support ACL policy based on time period Provide MAC, IP, L4 port and port level security control functions |
QoS | Traffic classification based on COS/DSCP (simple classification) Traffic classification based on ACL (complex classification) Traffic classification based on inner header of the tunnel packets Queue scheduling Remark the priority fields (COS/DSCP) of the packet based on ACL Traffic policing based on direction(in/out) of Port Traffic policing based on direction(in/out) of VLAN Traffic policing based on direction(in/out) of flow Traffic policing based on direction(in/out) of aggregated flow SP（Strict Priority）scheduling WRR（Weighted Round Robin）scheduling SP + WRR mixed scheduling |
Safety | Support Radius & TACACS+ authentication Support port isolation Support broadcast message rate suppression Support IP Source Guard Support ARP flood suppression and ARP spoofing protection |
Layer 3 | Support ARP learning and aging Support IPv4static route Support dynamic route RIP/OSPF Support IPv4/IPv6 dual-stack platform Support CLI、Telnet、WEB、SNMP V1/V2/V3、SSHv2 mode |
Terminal Services | Configurations through CLI Console Terminal service |
Maintenance | Per-module Debug features CPU usage display and alarm Memory usage display and alarm User operation logs Management of logs, alarms, and debugging information Manual reboot Reboot Information logging Ping IPv6 Ping Traceroute To CPU/From CPU packets statistics Time configuration Timezone |
System Security | SSHv1/v2 RADIUS TACACS+ MAC/IP ACL Port/VLAN/L4-Port ACL IP Source Guard Limitation on MAC address learning on interface Rate limit CPU Traffic Limit CLI/WEB/SNMP/Telnet/SSH filtering |
Spanning-Tree | Rapid Spanning-Tree Protocol Multi-instance Spanning-Tree Protocol |
Network Management | DHCP Server DHCP Relay SNTP Simple Network Time Protocol） LLDP |
Configuration Management | Inband management interface and configuration Outband management interface and configuration Privileged user priority and privileged commands Network management based on SNMPv1/v2c Public and private MIB Public and private Trap Configuration and management based on WEB Restore factory default configuration |
File system | Upload and download files through FTP or TFTP |
System Management | Support FTP, TFTP file upload and download Support SNTP Support LLDP neighbor device discovery protocol Support Ping and Traceroute Supports configuration management based on WEB pages |
Upgrade | Upgrade with the local image file Upgrade with the remote TFTP server Online upgrade Uboot |
Connector Specifications
The switch provides standardized interfaces, thus facilitating rapid and trouble-free integration into the existing network infrastructures.
Network Interfaces
The switch optical interface ports for SFP/SFP+ modules and below table is available SFP/SFP+ module list.
Index | SFP/SFP+ Module Description |
1 | - Wavelength: 850 nm / Distance: 550 m / Mode: multi-mode - Connector: LC / Data rate: 1.25Gbit/s / Core type: Dual Core - Operating Temperature: 0 °C - 70 °C |
2 | -. Wavelength: 1310nm / Distance: 5km / Mode: single-mode -. Connector: LC / Data rate: 1.25Gbit/s / Core type: Dual Core -. Operating Temperature: 0 °C – 70 °C |
3 | - Wavelength: 1310 nm / Distance: 10 km / Mode: single-mode - Connector: LC / Data rate: 1.25 Gbit/s / Core type: Dual Core - Operating Temperature: 0 °C – 70 °C |
4 | - Wavelength: 1310 nm / Distance: 15 km / Mode: single-mode - Connector: LC / Data rate: 1.25 Gbit/s / Core type: Dual Core - Operating Temperature: 0 °C – 70 °C |
5 | - Wavelength: 1310 nm / Distance: 20 km / Mode: single-mode - Connector: LC / Data rate: 1.25 Gbit/s / Core type: Dual Core - Operating Temperature: 0 °C - 70 °C |
6 | - Wavelength: 1310 nm / Distance: 40 km / Mode: single-mode - Connector: LC / Data rate: 1.25 Gbit/s / Core type: Dual Core - Operating Temperature: 0 °C - 70 °C |
7 | - Wavelength: 850nm / Distance: 300m / Mode: Multimode - Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core - Operating Temperature: 0°C ~ 70 °C - 10GBASE-SR (10G) |
8 | - Wavelength: 850nm / Distance: 300m / Mode: Multimode - Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core - Operating Temperature: 0°C ~ 70 °C - 1000BASE-SX (1G), 10GBASE-SR (10G） |
9 | - Wavelength: 1310nm / Distance: 10Km / Mode: Single mode - Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core - Operating Temperature: 0°C ~ 70 °C - 10GBASE-LR (10G) |
10 | - Wavelength: 1550nm / Distance: 40Km / Mode: Single mode - Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core - Operating Temperature: 0°C ~ 70 °C - 10GBASE-ER (10G) |
11 | - Wavelength: 1310nm / Distance: 70Km / Mode: Single mode - Connector: LC / Data rate: 10.3125 Gbit/s / Core type: Dual Core - Operating Temperature: 0°C ~ 70 °C - 10GBASE-ZR (10G） |
Purchase Info
Product Name | Product Description |
S5720-8H | 8*10G Base-T RJ45, External Single power supply |
S5720-8X | 8*10G Base-T, 4*1000M Base-X SFP +, External Single Power |
Exhibition Preview
FAQ
Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.
What is an optical network terminal (ONT)? How does it differ from a regular modem?
What is the architecture of a fiber optic network (PON)?
What are the functions of the PON port and LAN port on an optical network terminal (ONT)?
Why does the optical network terminal need to register LOID/SN?
Optical modem dialing vs. router dialing: which is better?
How to determine whether the fiber optic signal is normal?
Recommend
Send enquiry
NOTE: Please leave your email, our professionals will contact you ASAP!
Contact Us
CopyRight © 2025 Copyright © Shenzhen GL-COM Technology CO., LTD. All Rights Reserved.
E-mail：
WhatsApp：
Message：
在线客服添加返回顶部
右侧在线客服样式 1,2,3 1
图片alt标题设置： Shenzhen GL-COM Technology CO., LTD.
表单验证提示文本： Content cannot be empty!
循环体没有内容时： Sorry,no matching items were found.
CSS / JS 文件放置地