Email: demi@gl-com.com

language

Shenzhen MaoTeWang Electronic Technology Co., Ltd.

Home page

4GE + POTS +CATV+ WIFI6 AX3000 X8214U-JC

The X8214U-JC is a XPON optical terminal access device (AX3000Mbps) that is highly integrated with dual-frequency Wi-Fi6. It is an optical fiber to the home terminal product of the operator. It supports ultra-bandwidth access through XPON upstream technology, and provides users with basic WIFI functions, routing, VOIP, gigabit Ethernet functions and client-side CATV interface functions. The X8214U-JC upstream network ports are XPON ports. The downstream user ports include four GE electrical ports, one USB port, one VOIP port, one CATV port, and one AX3000 WiFi6 WLAN port.

Category:

ONU

E-mail

Product Details

Product Overview

Product Highlight

1 * XPON interface: SC/UPC （or SC/APC）interface, E/GPON standard

1 *Ethernet interface: 10 Mbps / 100 Mbps, 1000 Mbps, RJ - 45, IEEE802.3-2005 standard

1* VOIP interface: in accordance with G. 711 a/u, G. 729 a/b, G. 722 standard

1*CATV, C/N ≥43dB, C/CTB ≥55dB, C/CSO ≥55dB, MER ≥32dB, BER ≤1*10E-6

1* Standard USB 3.0 interface

Dual-band WIFI6 AX3000 (2 ×2 MIMO (2.4G&5G))

Solution Display

The PON system usually consists of the OLT at the office side, the ONU and the ODN at the user side, and adopts a point-to-multipoint network structure. The ODN consists of single-mode optical fibers and passive optical devices such as optical splitters and optical connectors. It provides the optical transmission medium for the physical connection between the OLT and ONU.Implement FTTX service deployment application.

Product Specification

Hardware Specifications	Description
Port	4GE+1VOIP+CATV+1USB+WIFI6+G/EPON
LED	POWER+PON/LOS +INTERNET +LAN+VOIP + WiFi +WPS+USB+CATV
Button	POWER + RST +WIFI+WPS+LED
Flash & Memory	Flash: 256MB NAND; Memory: 512 DDR4
Power Supply	12V/1.5A
Power Consumption	<18W
Environment Standard	Operating Temperature: -5~45℃ Storage Temperature: -20~70℃ Operating Humidity: 5%~95% （non-condensing）
Environment Friendly	RoHs、CE、CCC
Weight	0.358KG
*Size (WDH) mm*	190mm135mm33mm
PON Module Type	Class B+, SC/UPC/APC
Wavelength	UP 1310nm, Down 1490nm
TX Optical power	0.5~5dbm
RX Optical sensitivity	-28dBm
Transmission distance	0~20km
Transmission rate	EPON: Upstream 1.25Gbps/Downstream 1.25Gbps GPON: Upstream 1.25Gbps/Downstream 2.5Gbps
LAN Interface type	RJ45（10/100/1000Mbps ）
VOIP	RJ11
CATV	British F-head
USB	USB3.0
WIFI	Dual-band WIFI6 AX3000 (2 ×2 MIMO (2.4G&5G))

WiFi6 (AX3000)

Attributes		Description
WiFi6 (AX3000)	WiFi Protocol	2.4GHz supports 802.11b/g/n/ax 5GHz supports 802.11a/n/ac/ax
	Transmit Power	2.4G 100Mw; 5G /200mW
	Antenna Gain	5dBi
	Antenna	Dual-antenna MIMO (2*2) (2.4G&5G)
	WLAN Penetrate	One reinforced concrete wall or two ordinary brick walls (non-reinforced concrete)
	WLAN Access Capability	64 /SSID
	Channel	2.4GHz（channel 1-13） 5GHZ（channel 36-161 ）
	WPS	WLAN terminal devices with WPS Push Button function establish connection within 2 minutes
	WLAN Security Function	WPA-PSK、WPA2-PSK、WPA3、WPA-PSK/WPA2-PSK AES、AES+TKIP
	Air Speed	574 Mbps (2.4GHz), 2402 Mbps (5GHz)
	Multicast	WMM (Wi-Fi Multi Media)

VOIP and CATV

Attributes		Description
VoIP	VoIP Port	Call waiting; In-conditional Call Forward Call forward if busy; Call forward if no reply Three-party calls G711A/G711U/G729/G722 SDP protocol (RFC 2327 and RFC 4566) T.30/T.38/G.711 fax mode DTMF
CATV	Remote Control	ON/OFF
	Optical AGC	-10~+2dBm
	Output Level	76dBuV
	RF Bandwidth	47-1000 MHz
	In-band Flatness	±1.25dB
	Output Return Loss	≥12dB
	CATV System Parameters	C/N ≥ 43dB C/CTB ≥ 55dB C/CSO ≥ 55dB MER ≥ 32dB BER ≤ 1*10E-6

Panel view

Interface		Description
1	POWER	12V/1.5A, power input interface
2	ON/OFF	Power switch button
3	RST	Reset the ONT
4	LAN1/LAN2/LAN3/LAN4	RJ-45 10/100/1000 Base-T Ethernet Interface
5	VOIP	RJ-11 FXS Interface
6	PON	G/EPON interface
7	WPS	WPS switch button
8	WIFI	WIFI switch button
9	LED ON/OFF	LED switch button
10	CATV_RF	The RF interface uses a coaxial cable to connect the TV

LEDs Operating Status

The operation status of X8214U-JC-T can be determined by using the front LED. The panel LED indicator will display the status of each interface. The meaning of LED is shown in the following table.

LED Name	Color	Indicates
PWR	Green/Solid	Normal
PWR	OFF	No power
LOS	Red	Optical link is NOT OK（rang: out of -8~-29 dbm）
	Green/Flash	Optical link is OK（rang: in -8~-29 dbm）
	Green/solid	Registerd successful and active
Internet	Green/solid	The wan interface of the internet is configured
Internet	OFF	The Internet WAN interface is not configured or the Internet WAN interface is configured but does not take effect.
LAN1/ LAN2/ LAN3/ LAN4	Green/Flash	device connected
	Green/Flash	Active or Link data receive and transfer (Green/flash)
	OFF	device not connected
	OFF	link down
VOIP	Green	successfully registered to softswitch
VOIP	Off	Not be registered to softswitch
WIFI	Green/Flash	The terminal is connected to transmit data wirelessly
WIFI	OFF	No power/WIFI disable
WPS	Green	WPS started working
WPS	OFF	WPS is not working
USB	Green	Connected and data receive and transfer
USB	OFF	No power/error/USB is not connected/USB disable
CATV	Green-Flash	The ONT received a catv signal of 1550nm
CATV	OFF	No CATV optical signal connection

Plug-In Units

The device uses a standard 5.5*2.1*9.5mm Non tuning fork DC head interface power adapter. Select an appropriate adapter for power supply according to device energy consumption.

The below shows the electrical characteristics of the adapter：

Characteristic	Power adapter
AC: INPUT	AC: 100～240V; 50/60Hz
DC: OUTPUT	DC: 12V/1.5A
Rated Power	18W

Software Specification

Attributes	Description
XPON Feature	ITU-T G.984.1-4 ITU-T G.988/TR255/TR156 IEEE802.3ah 15 TCONTs /256GEM ports 8 Egress queues per TCONT at least VLAN/ priority/VEIP gem mapping mode SN/LOID/SN +Password authentication Performance monitoring: eth/Gem port Dying gasp
Ethernet Port	Ethernet port-based VLAN tags and tag removal MAC address learning 10/100/1000Mbps Auto negotiation
L2 Feature	MAC learning (SVL)/aging Support max frame length to 1518 bytes VLAN tagging for untagged packets Support VLAN 1-4094
L3 Feature	PPPoE/Static IP/DHCP NAT/NAPT Port forwarding ALG, UPnP, DDNS IPv4/IPv6 dual stack, DS-Lite Static, and Default Routes Multiple services on one WAN port
QoS	Support 8 Queues with Strict Priority Ethernet port rate limitation 802.1 priority SP/WRP Service flow classification
Multicast	IGMP v2 (RFC 2236) and IGMP v3 (RFC 3376) IGMP snooping and IGMP Proxy MLD v1
Management	OMCI/WEB UI/TR069 Telnet/SSH Management with CLI commands Dual-system software backup and rollback

Purchase Info

Model Number

Description

X8214U-JC

4GE+1VOIP+1USB+WIFI6+CATV+G/EPON，

Accessories: Power Adapter, RJ45 cable, RJ11 cable；

Exhibition Preview

FAQ

Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.

What is an optical network terminal (ONT)? How does it differ from a regular modem?

An optical network unit (ONU) is an end device in a fiber optic network that converts optical signals transmitted via fiber optics into electrical signals (for use by routers, computers, and other devices), and vice versa.

What is the architecture of a fiber optic network (PON)?

Fiber optic networks typically use a passive optical network (PON) architecture, which is divided into three layers

What are the functions of the PON port and LAN port on an optical network terminal (ONT)?

PON port (fiber optic interface): Connects to the fiber optic cable entering the home and receives optical signals (usually SC/APC interface, blue square head).

Why does the optical network terminal need to register LOID/SN?

LOID (Logical Identifier) or SN (Serial Number) is the credential used by operators to bind user identities, and is used for OLT authentication of optical modems.

Optical modem dialing vs. router dialing: which is better?

Ordinary users: Optical modem dialing. Game/NAS users: Switch to bridge mode and dial up using a high-performance router.

How to determine whether the fiber optic signal is normal?

Check the optical modem indicator lights Log in to the optical modem management interface: Check the optical power (unit: dBm)

Recommend