GL-E8024U-RP-24 port POE ONU

The 24 -Port PoE ONU, with 24 100Mbit RJ45 ports,1PON Port，and 1 SFP fiber Port, model GL-E8024UP, reduces equipment and installation costs by delivering data and power over existing Ethernet cables (CAT5 cable)to Power over Ethernet (PoE) enabled devices such as Access Points and IP Cameras. Boost office efficiency and reduce network congestion with a total switching capacity of 8.8Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts/30Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with the GL-2024SP to install non-PoE devices in remote locations.

Category:

MDU

+86 13392878696

demi@gl-com.com

E-mail

Send enquiry

Contact Email

Product Details

Product overview

Boost office efficiency and reduce network congestion with a total switching capacity of 8.8Gbps. LED indicators display device status for easy power management and troubleshooting. An internal power supply reduces clutter and delivers 15.4 Watts/30Watts to each PoE port. A convenient on/off button is located on the back of the switch. Non-PoE devices can connect to the switch—auto-sensing PoE technology cuts power to non-PoE connected devices. Use PoE Splitter with the GL-2024SP to install non-PoE devices in remote locations.

Key features

24-Port 10/100Mbps + 1 Gigabit SFP Port +1 PON PORT

24 -Port supply power to PoE Powered Device

Complies with the IEEE 802.3AF/IEEEE802.3AH standard

If 12 POE port work only, then complies with IEEE 802.3at standard,30W each port
Each switch port support auto-negotiation-10/20, 100/200Mbps (Fast Ethernet) , 1000/2000Mbps (Gigabit Ethernet).
Support MAC address auto-learning and auto-aging >Prevents packet loss with back pressure (Half-duplex) and IEEE 802.3x PAUSE frame flow control (Full-duplex)
High performance Store and Forward architecture, broadcast storm control, runt / CRC filtering eliminates erroneous packets to optimize the network bandwidth

Non-blocking switching architecture that forwards and filters packets at full wire-speed for maximum throughput

On/Off power switch

Specifications

Product name	24-ports POE ONU
Order No.	GL-E8024UP
Network protocols and standards	- IEEE 802.3 10BASE-T - IEEE 802.3u 100BASE-TX - IEEE 802.3ab 1000BASE-T - IEEE 802.3z 1000BASE-X - IEEE 802.3x Flow Control - IEEE 802.3af Power over Ethernet
Power Specifications	- Power consumption: maximum 365W - PoE Power: 350W - Voltage: 100 - 240 VAC, 50 -60 Hz
Network interface	- 24 10/100/1000M ports (MDI / MDIX adaptive); ports with PoE features (24)
Physical Specifications	- Dimensions: 440 x 260x 44.5 mm - Weight: 3.55 kg
Electromagnetic radiation	- CE mark, commercial - FCC Part 15 Class A - VCCI Class A - C-Tick
Environmental norms	- Operating Temperature: 0 ° - 50 ° C (32 ° - 104 ° F) - Storage Temperature: -20 ° - 70 ° C (-4 ° - 158 ° F) - Operating Humidity: Maximum relative humidity 90% without condensation - Storage humidity: 95% maximum relative humidity, non-condensing - Working height: up to 10,000 feet (3,000 meters) - storage altitude: the largest 10,000 feet (3,000 meters)
LEDs	- Each device: power light - Per port (10/100 and Gigabit): connection speed indicator - Per PoE port: PoE power-on LED
Radiation / electromagnetic immunity,	- EN 55024
Certification	- CE, FCC, RoHS
Performance Specifications	- Forwarding modes: Store and forward - Bandwidth: 8.8 Gbps (non-blocking) - network latency: 100 Mbps to 100 Mbps transmission, storage and forwarding mode under a 64-byte frame delay is less than 20 microseconds - Buffer memory: 3Mb per system - Addressing: 48-bit MAC address - the address database size: 8,000 per system MAC address - Mean failure interval (MTBF): 300,000 hours (about 34 years)
Warranty	1 year
Package Contents	- GL-X8024U-RP, 24 port POE switch - the power cord - L rails

Exhibition Preview

FAQ

Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.

What is an optical network terminal (ONT)? How does it differ from a regular modem?

An optical network unit (ONU) is an end device in a fiber optic network that converts optical signals transmitted via fiber optics into electrical signals (for use by routers, computers, and other devices), and vice versa.

What is the architecture of a fiber optic network (PON)?

Fiber optic networks typically use a passive optical network (PON) architecture, which is divided into three layers

What are the functions of the PON port and LAN port on an optical network terminal (ONT)?

PON port (fiber optic interface): Connects to the fiber optic cable entering the home and receives optical signals (usually SC/APC interface, blue square head).

Why does the optical network terminal need to register LOID/SN?

LOID (Logical Identifier) or SN (Serial Number) is the credential used by operators to bind user identities, and is used for OLT authentication of optical modems.

Optical modem dialing vs. router dialing: which is better?

Ordinary users: Optical modem dialing. Game/NAS users: Switch to bridge mode and dial up using a high-performance router.

How to determine whether the fiber optic signal is normal?

Check the optical modem indicator lights Log in to the optical modem management interface: Check the optical power (unit: dBm)

Recommend