Email: demi@gl-com.com

language

Shenzhen MaoTeWang Electronic Technology Co., Ltd.

Quote Now

Home page

GL-X8012U-ZTE

Compliance with IEEE 802.3ah(EPON) & ITU-T G.984.x(GPON) standard Compliance with IEEE802.11b/g/n/ac 2.4G & 5G WIFI standard Support IPV4 & IPV6 Management and transmission Support TR-069 remote configuration and maintenance Support Layer 3 gateway with hardware NAT Support Multiple WAN with Route/Bridge mode Support Layer 2 802.1Q VLAN, 802.1P QoS,ACL etc Support IGMP V2 and MLD proxy/ snooping Support DDSN, ALG, DMZ, Firewall and UPNP service Support POTS interface for VOIP service Support bi-directional FEC It is launched to be oriented to multi-service integration network as an optical network unit device, which belongs to XPON HGU terminal for FTTH/O scenario. It configures four 10/100/1000Mbps ports,WiFi (2.4G+5G) port, one POTS ports and 2 USB ports.

Category:

ONU

E-mail

Product Details

Features

Compliance with IEEE 802.3ah(EPON) & ITU-T G.984.x(GPON) standard

Compliance with IEEE802.11b/g/n/ac 2.4G & 5G WIFI standard

Support IPV4 & IPV6 Management and transmission

Support TR-069 remote configuration and maintenance

Support Layer 3 gateway with hardware NAT

Support Multiple WAN with Route/Bridge mode

Support Layer 2 802.1Q VLAN, 802.1P QoS,ACL etc

Support IGMP V2 and MLD proxy/ snooping

Support DDSN, ALG, DMZ, Firewall and UPNP service

Support POTS interface for VOIP service

Support bi-directional FEC

It is launched to be oriented to multi-service integration network as an optical network unit device, which belongs to XPON HGU terminal for FTTH/O scenario. It configures four 10/100/1000Mbps ports,WiFi (2.4G+5G) port, one POTS ports and 2 USB ports.

Highlights

Support docking compatibility with OLT of various manufacturers

Support automatically adapt to the EPON or GPON mode used by the peer OLT

Support 2.4 and 5G Hz dual band WIFI

Support multiple WIFI SSID

Support EasyMesh WIFI function

Support WIFI WPS function

Support multiple wan configuration

Support WAN PPPoE/DHCP/Static IP/Bridge mode.

Support fast transmission of hardware NAT

Hardware Specifications

interface: 1* G/EPON+4*GE+2.4G/5.0G WLAN+2*FXS+2*USB

Power adapter input: 100V-240V AC, 50Hz-60Hz

Power Supply: DC 12V/1.5A

Indicator light: POWER/PON/LOS/LAN1/ LAN2/LAN3/LAN4/FXS1/FXS2/2.4G/5G

Button: Power switch Button, Reset Button,WLAN Button, WPS Button

Power Consumption: <18W

Working temperature: -20℃～+50℃

Environment humidity: 5% ~ 95% (non-condensing)

Dimension：200mm x17mm x3.3mm (W x D x H) (L×W×H Without antenna)

Net Weight：0.35Kg

PON Interface

Interface Type: SC/APC, CLASS B+

Transmission distance: 0～20km

Working wavelength: Up 1310nm； Down 1490nm

RX Optical power sensitivity: -27dBm

Transmission rate:

GPON: Up 1.244Gbps；Down 2.488Gbps

EPON: Up 1.244Gbps；Down 1.244Gbps

Ethernet Interface

Interface type：4* RJ45

Interface parameters：10/100/1000BASE-T

Wireless

Interface type：External 2*2T2R External antenna

Antenna gain: 5dBi

Interface maximum rate: 2.4G，WLAN：300Mbps，5.8G WLAN： 866Mbps

Interface working mode:2.4G WLAN：802.11 b/g/n，5.8G WLAN：802.11 a/n/ac

POTS Interface

Interface type: 1*FXS , RJ11 connector

Support G.711 codec

Exhibition Preview

FAQ

Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.

What is an optical network terminal (ONT)? How does it differ from a regular modem?

An optical network unit (ONU) is an end device in a fiber optic network that converts optical signals transmitted via fiber optics into electrical signals (for use by routers, computers, and other devices), and vice versa.

What is the architecture of a fiber optic network (PON)?

Fiber optic networks typically use a passive optical network (PON) architecture, which is divided into three layers

What are the functions of the PON port and LAN port on an optical network terminal (ONT)?

PON port (fiber optic interface): Connects to the fiber optic cable entering the home and receives optical signals (usually SC/APC interface, blue square head).

Why does the optical network terminal need to register LOID/SN?

LOID (Logical Identifier) or SN (Serial Number) is the credential used by operators to bind user identities, and is used for OLT authentication of optical modems.

Optical modem dialing vs. router dialing: which is better?

Ordinary users: Optical modem dialing. Game/NAS users: Switch to bridge mode and dial up using a high-performance router.

How to determine whether the fiber optic signal is normal?

Check the optical modem indicator lights Log in to the optical modem management interface: Check the optical power (unit: dBm)

Recommend