Media Converter Rack Chassis

GL-16A/W fiber converter rack (2U) is a kind of economical converter rack used in machine rooms.The rack can accommodate maximum 16 different types of fiber converter module cards. There is an active and standby power system in a centralized manner, supporting automatic switching.

Category:

Fiber optic transceiver

+86 13392878696

demi@gl-com.com

E-mail

Send enquiry

Contact Email

Product Details

Product Overview

Main Features

The active/standby power configuration ensures uninterrupted operation of the system;

Supporting two power supply modes: AC220V and DC -48V, so that the system is applicable to multiple operating environment;

Supporting the simultaneous operation of multiple types of module cards at different rates, greatly improving the system applicability;

Each module supports hot swapping;

Module cards supported: 100M and 1000M card series.

Product specifications

Type	16A	16W
Hardware specifications
standard	IEEE802.3、IEEE802.3u、IEEE802.3X、IEEE802.3ab	IEEE802.3、IEEE802.3u、IEEE802.3X
Backplane bandwidth	16 card（100M/1000M）	1 management card（WEB management） 15 card（100M）
MAC Address table	SC/FC/ST
Port type	Multi-mode Double ffiber：2km Single-mode Double fiber：10/20/40/60/80/100/120Km， single-mode Single fiber：10/20/40/60/80Km Twisted-pair cable：100m
Power	110-240VAC或-48VDC
power consumption	90W
Physical size	19inch/2U/48533595mm
weight	6.2kg
Suitable temperature	0℃-50℃（Working environment），-20℃-70℃（Storage temperature）
Suitable humidity	5%-90% No condensation (work environment)

Ordering Information

Type

specifications:

GL-16A

16 card（100M/1000M）

GL-16W

1 management card（WEB management）

15 card（100M）

Exhibition Preview

FAQ

Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.

What is an optical network terminal (ONT)? How does it differ from a regular modem?

An optical network unit (ONU) is an end device in a fiber optic network that converts optical signals transmitted via fiber optics into electrical signals (for use by routers, computers, and other devices), and vice versa.

What is the architecture of a fiber optic network (PON)?

Fiber optic networks typically use a passive optical network (PON) architecture, which is divided into three layers

What are the functions of the PON port and LAN port on an optical network terminal (ONT)?

PON port (fiber optic interface): Connects to the fiber optic cable entering the home and receives optical signals (usually SC/APC interface, blue square head).

Why does the optical network terminal need to register LOID/SN?

LOID (Logical Identifier) or SN (Serial Number) is the credential used by operators to bind user identities, and is used for OLT authentication of optical modems.

Optical modem dialing vs. router dialing: which is better?

Ordinary users: Optical modem dialing. Game/NAS users: Switch to bridge mode and dial up using a high-performance router.

How to determine whether the fiber optic signal is normal?

Check the optical modem indicator lights Log in to the optical modem management interface: Check the optical power (unit: dBm)

Recommend