Pizza Box 10G XG(S)-PON Combo OLT XGS-8616T-JT

Product Overview

XGS-8616T-JT OLT is a highly integrated, large-capacity XG(S)-PON OLT for operators, ISPs, enterprises, and campus applications. The product follows the ITU-T G.987/G.988 technical standard, and can be compatible with three modes of G/XG/XGS at the same time. 

The asymmetric system (up 2.5Gbps, down 10Gbps) is called XGPON, and the symmetric system (up 10Gbps, down 10Gbps) is called XGSPON. The product has good openness, strong compatibility, high reliability and complete software functions, together with the optical Network unit (ONU), it can provide users with broadband, voice, video, surveillance and other comprehensive service access. It can be widely used in operators' FTTH access, government and enterprise park access, campus network access, ETC. XG(S)-PON OLT provides higher bandwidth. In application scenarios, service configuration and O&M completely inherit GPON.

GP5810 is only 1U in height, easy to install and maintain, and save space. Supports mixed networking of different types of ONUs, which can save a lot of costs for operators.

Product Highlight  

Comply with ITU-T G.984/987/G.988 technical standards, with good connectivity capabilities

Pon port can support GPON/XGPON/XGSPON three modes 

Rich Layer 2/3 switching features and Flexible management methods

Support multiple link redundancy protocols such as FlexLink/STP/RSTP/MSTP/ERPS/LACP

Support RIP、OSPF

Support Power redundancy backup, Modular power supply, Modular fans supply

Support ONT power failure alarm

Device Brief Information

Solution Display

The XG-PON system usually consists of the OLT at the office side, the ONU and the ODN at the user side, and adopts a point-to-multipoint network structure. The ODN consists of single-mode optical fibers and passive optical devices such as optical splitters and optical connectors. It provides the optical transmission medium for the physical connection between the OLT and ONU.

Hardware Specification

Product Interface

LEDs Operating Status

The operation status of GP5810 can be determined by using the front LED. The panel LED indicator will display the status of each interface. The meaning of LED is shown in the following table.

Plug-In Units

On the rear panel of the OLT, there are two slots for Power Supply Unit (PSU).  The mounting slots can be equipped with DC or AC type PSUs.  The different type of PSUs can be equipped into the OLT.  The below shows AC and DC type of power supply modules Two PSUs, for supplying redundancy, dual PSUs have to be installed at a system.

The power supply unit (PSU) feeds the proper power voltage to the base board of OLT.  Two PSUs are possible to be mounted into rear of the chassis and it can be DC or AC type of PSU.  Therefore, you need to decide to choose proper power supply unit according to installation environment.

The power connector (AC and DC type) for main power supply is located on the rear panel of the PSU.  For redundant power feeding, the second PSU has to be used.

The below shows the electrical characteristics of the OLT：

FAN Unit

The OLT provides 2 fan unit slots on the rear panel. This plug-in unit internally consists of 2 fans. User can insert fan unit to a fan slot by slowly adjusting them to fit into the slot guidance. The air flows from the front side inlet to the rear side outlet.

Software Specification

Connector Specifications

The OLT provides standardized interfaces, thus facilitating rapid and trouble-free integration into the existing network infrastructures.

PON Interfaces 

The OLT contains 16 XGS-COMBO PON interface ports for SFP+ modules and below table is available .

XGS COMBO PON module list.

Network Interfaces

The OLT optical interface ports for SFP/SFP+ modules and below table is available SFP/SFP+ module list.

Purchase Info