Email: demi@gl-com.com
X8004U-HZ
Category:
ONU
Product Details
Product Overview
GE8004U-HZ is an ONT device terminal in the XPON system. In conjunction with OLT, ONT can provide a variety of broadband services to connected users, such as Internet, VoIP, IPTV, Video Conference and other services. Based on mature, stable and cost-effective XPON technology, it provides one PON interface, one 1000M electrical interfaces and there 100Melectrical interfaces, one USB interface. Single fiber wavelength division multiplexing (downlink 1490nm, uplink 1310nm) is adopted, only one fiber is needed to connect with OLT, and the maximum transmission distance is up to 20km, which supports power outage report function and local WEB management function.
Product Interface
Interface: optical port, voice port, network port 1- network port 4, power socket, power switching.
Indicator Light: WPS, wireless, USB, Telephone, network port 1-4, Optical signal, PON registration, power supply.
product feature
1. HGU ONU product form, supporting bridge and NAT mode;
2. BOB product process;
3.802.11B /g/n wireless access;
4.2*3dBi external dual antenna is used wirelessly.
5. USB interface supports configuration saving and recovery;
6.Provide a VOIP interface to connect the ordinary telephone;
7.12V /1.0A External power supply.
Product light construction features
EPON
meets IEEE 802.3 EPON MAC standard;
supports a downlink rate of 1.25gbit /s and an uplink rate of 1.25gbit /s.
supports DS/US FEC;
supports the downstream encryption and decryption function;
supports bandwidth allocation;
supports synchronous Ethernet;
supports RFC4837;
GPON
Compliant with ITU G.984.x
Bandwidth US: 1.24416G/DS: 2.48832G
Supports 32 TCONT, 128 GEM
Supports AES, key switching
Supports upstream and downstream FEC
Supports DBRu
HW dying gasp
Business performance
supports bridge mode and routing mode, wan three-tier routing NAT forwarding;
supports Tag/Untag Ethernet frames of 802.3 and 802.1q;
supports firewall, IP address filtering, MAC address filtering, wireless MAC address filtering, accurate control;
supports port priority queues;
supports ipv4 default routing, static routing, routing table view, ipv6 static routing, port or vlan binding;
supports DMZ function, port mapping function, port triggering configuration;
supports multicast, DN configuration, DDNS, upnp function, DSCP mapping.
supports OAM and EEELLDP;
Ethernet supports 802.1Qav and 802.1AS/1588v2 timed synchronization;
supports DOS attack prevention;
supports IEEE 802.3az energy-saving Ethernet capability, and supports 1000base-t, 100base-tx full duplex and 10base-full/half duplex modes.
supports flow control based on entry. For businesses exceeding the flow, you can choose to drop packet or Pause frame backpressure.
Support QoS function;
VIOP character
single channel option, 105V most battery design
is available in either PCM/SPI or ZSI
compact structure, 84-pin 7*7mm QFN components
VOIP processor and SOCS adopt the 5th generation line interface
The voice path SDK and vp-api-ii software can implement FXS functions
energy saving switch control structure: up to 65vrms open circuit, up to 5REN load
two layer PCB design, complete bandwidth BOESCHT function
analog telephone adapter (ATAs)
specification:
description | symbol | test condition | Min | typ | max | unit | ||||
Ambient temperature, offset | Ta |
| -40 |
| +85 | ℃ | ||||
Digital and analog power supply voltages | DVDD,AVDD |
| 3.135 | 3.3 | 3.465 | VDC | ||||
Ultimate condition: battery voltage (active state) |
|
| -105VDC TO -12VDC | VDC | ||||||
Line current | ILA |
| 18 | 25 | 45 | mA | ||||
Ringing voltage | Vring | 5REN |
| 50 | 65 | Vrms | ||||
Second-line return loss | RL | 200to3400HZ |
| 30 |
| dB | ||||
Longitudinal balance |
| 1KHZ |
| 58 |
| dB | ||||
Device power consumption (continuous) | Pd(max) | 85度 |
| 1.5 |
| W | ||||
Connect to ambient thermal resistance |
|
|
| 29 |
| ℃/W
| ||||
Power consumption(Buck-Boost) | symbol | Test condition | TYP | Unit | ||||||
|
|
|
|
| ||||||
Shutdown | PD | Switcher off | 8 | mW | ||||||
disconnect |
| 37 | ||||||||
Low power Idle mode | On-hook | 52 | ||||||||
Idle | On-hook | 98 | ||||||||
active | Off-hook,300Ώ,ILA=25mA | 324 | ||||||||
ringing | 50Vrms,1REN | 462 | ||||||||
WIFI feature
technical norms:IEEE802.11b,IEEE802.11g,IEEE802.11n;
debug mode:802.11b:DSSS/BPSK/QPSK/CCK
802.11g:OFDM/DSSS/BPSK/QPSK/CCK;
802.11n: OFDM/DSSS/BPSK/QPSK/CCK;
speed:802.11b:compatibility 11,5.5,2,1 Mbps;
802.11g:compatibility 54,48,36,24,18,12,9,6 Mbps;
802.11n:compatibility 130,117,104,78,65,58,52,39,26,19.5,13,6.5Mbps;
channel:1~11 (USA, Canada) ; 1~13 (Europe) ; 1~14 (Japan);
frequency domain :2.4GHz-2.4835GHz;
transmission power:11b:17dBm +/- 1.5dBm;
11g:14dBm +/- 1.5dBm;
11n:11dBm +/- 1.5dBm;
receive sensitivity :11b:83dBm;
11g:70dBm;
11n:64dBm;
security safe:64/128-bits WEP; WPA/WPA2 wait;
The antenna number:2*3dBi Internal Antenna;
Support protocols and standards
ITU-T G.984.1/2/3/4、IEEE802.3、IEEE802.3u、、IEEE802.3x、IEEE802.3z、IEEE802.1d、IEEE802.1p、IEEE802.1q、IEEE802.1x、RFC1155、RFC1157、RFC1112、RFC1113 wait.
Application:FTTH FTTX

Exhibition Preview
FAQ
Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.
What is an optical network terminal (ONT)? How does it differ from a regular modem?
What is the architecture of a fiber optic network (PON)?
What are the functions of the PON port and LAN port on an optical network terminal (ONT)?
Why does the optical network terminal need to register LOID/SN?
Optical modem dialing vs. router dialing: which is better?
How to determine whether the fiber optic signal is normal?
Recommend
Send enquiry
NOTE: Please leave your email, our professionals will contact you ASAP!