X8005U-FZ 1GE+3FE+VOIP+5GWIFI XPON ONU

The 1GE+3FE+VOIP+5GWIFI dual-frequency ONT is one of the G/EPON optical network unit design to meet the requirement of the broadband access network to deliver triple-play services to the subscriber in FTTH, the ONT incorporates interoperability, key customers’ specific requirements and cost-efficiency,supports the full of services including voice ,video, and high speed internet access. have a high reliability and provide quality of service guarantee, easy management, flexible expansion and networking. It's fully meet the ITU-T technical standards and have good compatibility with third party manufacturers OLT.

Category:

ONU

+86 13392878696

demi@gl-com.com

E-mail

Send enquiry

Contact Email

Product Details

Product Description

Main Features

Supports 802.11ac, Compatible with 802.11 b/g/n/ac products.

Dual band - for combined wireless speeds of up to 1200bps at 2.4GHz and 5GHz band concurrently.

Support downstream 2.5Gbps and upstream to 1.25Gbps with transmission distance to 20Km.

Fiber access and gigabit port provide incredibly fast transfer speeds.

Supports OMCI (ONT Management Control Interface) remote management.

TDM inner transmission, support Native TDM type and CES over GEM.

Data Service

The ONT is delivered with 1*1000,3*100 Base-T interface, supporting:

Auto-negotiation and MDI/MDIX auto-sensing

Built-in layer-2 switch

Advanced data features such as VLAN tag manipulation, classification, and filtering

Built-in layer-3 routing and residential gateway

Product Specification

Item	1GE+3FE+VOIP+5GWIFI
PON interface	1×G/EPON port Receiving sensitivity: ≤ -28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
Wavelength	TX1310nm，RX1490nm
Optical interface	SC/PC connector
LAN interface	11000Mbps , 3100Mbps
Port	USB 2.0 ports and 1×POTS RJ11 connector
VOIP Standards	SIP (RFC3261), ITU-T G.729/G.722/G.711a/G.711
WiFi interface	IEEE802.11b/g/n/ac 2.4 GHz~ 5.8GHZ IEEE 802.11b: 1,2,5.5,11Mbps IEEE 802.11g: 6,9,12,18,24,36,48,54Mbps IEEE 802.11n: up to 200 Mbps 802.11ac External Antenna
Wireless Security	WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
Power supply	DC12V 1.5A
Operating condition	Temperature: -5℃～45℃ Humidity: 10%～90%（non-condensing）
Storing condition	Temperature: -30℃～+60℃ Humidity: 10%～90%（non-condensing）

Exhibition Preview

FAQ

Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.

What is an optical network terminal (ONT)? How does it differ from a regular modem?

An optical network unit (ONU) is an end device in a fiber optic network that converts optical signals transmitted via fiber optics into electrical signals (for use by routers, computers, and other devices), and vice versa.

What is the architecture of a fiber optic network (PON)?

Fiber optic networks typically use a passive optical network (PON) architecture, which is divided into three layers

What are the functions of the PON port and LAN port on an optical network terminal (ONT)?

PON port (fiber optic interface): Connects to the fiber optic cable entering the home and receives optical signals (usually SC/APC interface, blue square head).

Why does the optical network terminal need to register LOID/SN?

LOID (Logical Identifier) or SN (Serial Number) is the credential used by operators to bind user identities, and is used for OLT authentication of optical modems.

Optical modem dialing vs. router dialing: which is better?

Ordinary users: Optical modem dialing. Game/NAS users: Switch to bridge mode and dial up using a high-performance router.

How to determine whether the fiber optic signal is normal?

Check the optical modem indicator lights Log in to the optical modem management interface: Check the optical power (unit: dBm)

Recommend