Email: demi@gl-com.com

language

Shenzhen MaoTeWang Electronic Technology Co., Ltd.

Home page

X8005U-MTK

It is launched to be oriented to multi-service integration network as an optical network unit device, which belongs to XPON HGU terminal for FTTH/O scenario. It configures four 10/100/1000Mbps ports,WiFi (2.4G+5G) port, one POTS ports and 2 USB ports.

Category:

ONU

E-mail

Product Details

Product overview

Product Features

Compliance with IEEE 802.3ah(EPON) & ITU-TG.984.x(GPON) standard

Compliance with IEEE802.11b/g/n/ac 2.4G & 5GWIFI standard

Support IPV4 & IPV6 Management and transmission

Support TR-069 remote configuration and maintenance

Support Layer 3 gateway with hardware NAT

Support Multiple WAN with Route/Bridge mode

Support Layer 2 802.1Q VLAN, 802.1P QoS,ACL etc

Support IGMP V2 and MLD proxy/ snooping

Support DDSN, ALG, DMZ, Firewall and UPNP service

Support POTS interface for VOIP service

Support bi-directional FEC

Product Highlights

Support docking compatibility with OLT of various manufacturers

Support automatically adapt to the EPON or GPON mode used by the peer OLT

Support 2.4 and 5G Hz dual band WIFI

Support multiple WIFI SSID

Support EasyMesh WIFI function

Support WIFI WPS function

Support multiple wan configuration

Support WAN PPPoE/DHCP/Static IP/Bridge mode.

Support fast transmission of hardware NAT

Exhibition Preview

FAQ

Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.

What is an optical network terminal (ONT)? How does it differ from a regular modem?

An optical network unit (ONU) is an end device in a fiber optic network that converts optical signals transmitted via fiber optics into electrical signals (for use by routers, computers, and other devices), and vice versa.

What is the architecture of a fiber optic network (PON)?

Fiber optic networks typically use a passive optical network (PON) architecture, which is divided into three layers

What are the functions of the PON port and LAN port on an optical network terminal (ONT)?

PON port (fiber optic interface): Connects to the fiber optic cable entering the home and receives optical signals (usually SC/APC interface, blue square head).

Why does the optical network terminal need to register LOID/SN?

LOID (Logical Identifier) or SN (Serial Number) is the credential used by operators to bind user identities, and is used for OLT authentication of optical modems.

Optical modem dialing vs. router dialing: which is better?

Ordinary users: Optical modem dialing. Game/NAS users: Switch to bridge mode and dial up using a high-performance router.

How to determine whether the fiber optic signal is normal?

Check the optical modem indicator lights Log in to the optical modem management interface: Check the optical power (unit: dBm)

Recommend