XH3-2 XPON

E/GPON 1GE+3FE+1POTS+WiFi+USB ONU support Dual mode(EPON and GPON), It can also be applied to a wide temperature environment, and also has a powerful firewall function. E/GPON 1GE+3FE+1POTS+WiFi+USB ONU meets telecom operators FTTO (office), FTTD (Desk), FTTH(Home) broadband speed, SOHO broadband access, video surveillance and other requirements and design a EPON/GPON Gigabit Ethernet products. The box is based on the mature Gigabit EPON/GPON technology, highly reliable and easy to maintain, with guaranteed QOS for different service. And it is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.

Category:

ONU

+86 13392878696

demi@gl-com.com

E-mail

Send enquiry

Contact Email

Product Details

Product introduct

E/GPON 1GE+3FE+1POTS+WiFi+USB ONU support Dual mode(EPON and GPON), It can also be applied to a wide temperature environment, and also has a powerful firewall function.

E/GPON 1GE+3FE+1POTS+WiFi+USB ONU meets telecom operators FTTO (office), FTTD (Desk), FTTH(Home) broadband speed, SOHO broadband access, video surveillance and other requirements and design a EPON/GPON Gigabit Ethernet products. The box is based on the mature Gigabit EPON/GPON technology, highly reliable and easy to maintain, with guaranteed QOS for different service. And it is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.

Special Features

Dual Mode( can access gpon/epon olts ).

Plug and play, features auto-detecting, auto-configuration, and auto firmware upgrade, etc.

Integrated OAM remote configuration and maintenance function.

Support rich QinQ VLAN functions and IGMP Snooping multicast features.

Fully compatibility with OLT based on Broadcom/PMC/Cortina chipset.

Support 802.11n WiFi(2T2R) function.

Support NAT, Firewall function.

Support IPv4 and IPv6 dual stack.

Integrated line testing compliant with GR-909 on POTS.

Technical parameters

Technical item	1GE+3FE+1POTS+WiFi+USB
PON interface	1 E/GPON port(EPON PX20+ and GPON Class B+) Wavelength:Tx1310nm,Rx 1490nm SC/UPC connector Receiving saturation:≥-8dBm Receiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBm Transmission distance: 20KM
LAN interface	1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
Wireless	Compliant with IEEE802.11b/g/n Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps 2T2R,2 external antenna 5dBi Support: multiple SSID Channel:13 Modulation type: DSSS、CCK and OFDM Encoding scheme: BPSK、QPSK、16QAM and 64QAM
POTS interface	1 FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line testing according to GR-909
USB interface	USB 2.0
LED	13, For Status of PWR、PON 、LOS、WAN、WiFi、FXS、ETH1~4、WPS、USB.
Operating condition	Temperature: 0℃～+50℃ Humidity: 5%～90%（non-condensing）
Storing condition	Temperature : -30℃～+75℃ Humidity :5%～90%（non-condensing）
Power supply	DC 12V,1/1.5A
Power consumption	≤10W
Dimension	205mm×140mm×37mm（L×W×H）
Net weight	0.34Kg

Exhibition Preview

FAQ

Listed below are answers to our most commonly asked questions. Don't see your question?Contact our customer service team. We would be glad to assist you.

What is an optical network terminal (ONT)? How does it differ from a regular modem?

An optical network unit (ONU) is an end device in a fiber optic network that converts optical signals transmitted via fiber optics into electrical signals (for use by routers, computers, and other devices), and vice versa.

What is the architecture of a fiber optic network (PON)?

Fiber optic networks typically use a passive optical network (PON) architecture, which is divided into three layers

What are the functions of the PON port and LAN port on an optical network terminal (ONT)?

PON port (fiber optic interface): Connects to the fiber optic cable entering the home and receives optical signals (usually SC/APC interface, blue square head).

Why does the optical network terminal need to register LOID/SN?

LOID (Logical Identifier) or SN (Serial Number) is the credential used by operators to bind user identities, and is used for OLT authentication of optical modems.

Optical modem dialing vs. router dialing: which is better?

Ordinary users: Optical modem dialing. Game/NAS users: Switch to bridge mode and dial up using a high-performance router.

How to determine whether the fiber optic signal is normal?

Check the optical modem indicator lights Log in to the optical modem management interface: Check the optical power (unit: dBm)

Recommend